Brass Stacker See Thru Scout Scope Mount for Mosin Nagant M38 & M44

	Brass Stacker See Thru Scout Scope Mount for Mosin Nagant M38 & M44 [else] [endif]

Brass Stacker Model 3844-SSM See Thru Scout Scope Mount for Mosin Nagant M38 & M44's. SPECIFICATIONS: This Mount utilizes the barrel pin hole and the pivot pin hole in the rear sight block. The Mount will accommodate a front to back (horizontal, parallel to bore axis) pin center distance of 1.56" (39.6mm) to 1.79" (45.4mm) and allows for an up and down (vertical, perpendicular to bore axis) pin center distance of .18" (4.6mm) to .41" (10.3mm). The Mount is designed to fit over rear sight blocks that measure between .750" (19.05mm) and .787" (20.00mm) wide. The total weight including hardware is 5.4 oz. Please note that we have made every reasonable effort to ensure that our Mount will work with the vast majority of M38 & M44's. If for any reason our Mount does not work with your specific M38 or M44 it can be returned (undamaged) for a full refund. FITMENT NOTES: This mount will NOT work for a 9130! See Model 9130-SSM for a 9130. The pin hole in the rear sight block is often located inconsistently as a result of the original manufacturing process. The pin hole, relative to the pivot pin, is frequently not parallel and may be out of alignment or skewed. The Mount can only accommodate so much of this misalignment. You should measure the center distances from barrel pin to pivot pin on both sides and check those with the dimensions listed in the SPECIFICATIONS to ensure that the mount will fit properly. A 3mm drill is provided and can be used to clean out and straighten (to some degree) without enlarging the barrel pin hole once the pin is removed. The barrel pin hole and pivot pin hole in the rear sight block are generally .118" (3.0mm) in diameter and the supplied 3mm bolts have a nominal OD of .115" (2.92mm). This tight fit along with the use of an appropriate liquid thread locker for the screws and nuts, as well as proper tightening of the same should result in no movement of the Mount during normal firing recoil. SCOPE & RINGS ARE NOT PROVIDED! ...Read more

Brass Stacker Model 3844-SSM See Thru Scout Scope Mount for Mosin Nagant M38 & M44's. SPECIFICATIONS: This Mount utilizes the barrel pin hole and the pivot pin hole in the rear sight block. The Mount will accommodate a front to back (horizontal, parallel to bore axis) pin center distance of 1.56" (39.6mm) to 1.79" (45.4mm) and allows for an up and down (vertical, perpendicular to bore axis) pin center distance of .18" (4.6mm) to .41" (10.3mm). The Mount is designed to fit over rear sight blocks that measure between .750" (19.05mm) and .787" (20.00mm) wide. The total weight including hardware is 5.4 oz. Please note that we have made every reasonable effort to ensure that our Mount will work with the vast majority of M38 & M44's. If for any reason our Mount does not work with your specific M38 or M44 it can be returned (undamaged) for a full refund. FITMENT NOTES: This mount will NOT work for a 9130! See Model 9130-SSM for a 9130. The pin hole in the rear sight block is often located inconsistently as a result of the original manufacturing process. The pin hole, relative to the pivot pin, is frequently not parallel and may be out of alignment or skewed. The Mount can only accommodate so much of this misalignment. You should measure the center distances from barrel pin to pivot pin on both sides and check those with the dimensions listed in the SPECIFICATIONS to ensure that the mount will fit properly. A 3mm drill is provided and can be used to clean out and straighten (to some degree) without enlarging the barrel pin hole once the pin is removed. The barrel pin hole and pivot pin hole in the rear sight block are generally .118" (3.0mm) in diameter and the supplied 3mm bolts have a nominal OD of .115" (2.92mm). This tight fit along with the use of an appropriate liquid thread locker for the screws and nuts, as well as proper tightening of the same should result in no movement of the Mount during normal firing recoil. SCOPE & RINGS ARE NOT PROVIDED! ...Read more

==================================================================
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.