Social Icons

Pages

Tuesday 26 February 2013

Hosetail with hose connector ø9 for quick coupling

Hosetail with hose connector ø9 for quick coupling

Hosetail with hose connector ø9 for quick coupling



[else] [endif]
Hosetail with hose connector ø9 for quick coupling

Hosetail with hose connector ø9 for quick coupling

Material:: Carbonated steel, with corrosion- proof treatment.



Internal diameter: 7.2 mm/7.4 mm.

Operating pressure: 2 - 12 bar.

Max. operating pressure: 16 bar.

Precision: constant dimensions.

Hardness: wear resitant.

Connector-Ø [mm]9
A [mm]54
Weight [g]25
...Read more


Hosetail with hose connector ø9 for quick coupling

Material:: Carbonated steel, with corrosion- proof treatment.



Internal diameter: 7.2 mm/7.4 mm.

Operating pressure: 2 - 12 bar.

Max. operating pressure: 16 bar.

Precision: constant dimensions.

Hardness: wear resitant.

Connector-Ø [mm]9
A [mm]54
Weight [g]25
...Read more



Hosetail with hose connector ø9 for quick coupling

Hosetail with hose connector ø9 for quick coupling
==================================================================
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Part 8 - Jane Eyre Audiobook by Charlotte Bronte (Chs 34-38)

Part 8 - Jane Eyre Audiobook by Charlotte Bronte (Chs 34-38) Video Clips. Duration : 158.18 Mins.


Part 8. Classic Literature VideoBook with synchronized text, interactive transcript, and closed captions in multiple languages. Audio courtesy of Librivox. Read by Elizabeth Klett. Playlist for Jane Eyre by Charlotte Brontë: www.youtube.com Jane Eyre free audiobook at Librivox: librivox.org Jane Eyre free eBook at Project Gutenberg: www.gutenberg.org Jane Eyre at Wikipedia: en.wikipedia.org View a list of all our videobooks: www.ccprose.com

Saturday 23 February 2013

Stainless Steel Threaded Insert, UNC Threads, HRC96 Hardness, #10-24 Threads, 0.50" Length, 60200 psi Tensile Strength, Made In US, Pack Of 10

target="_blank">Stainless Steel Threaded Insert, UNC Threads, HRC96 Hardness, #10-24 Threads, 0.50
Stainless Steel Threaded Insert, UNC Threads, HRC96 Hardness, #10-24 Threads, 0.50
==================================================================

Stainless Steel Threaded Insert, UNC Threads, HRC96 Hardness, #10-24 Threads, 0.50

E-Z LOK Knife Thread inserts for hard wood significantly reduce the possibility of stripping when using a threaded fasteners in materials such as oak, cherry, and maple. Ideal for applications ranging from furniture to cabinetry to storm shutters, E-Z LOK Knife Threads are easily installed using a standard screwdriver or optional drive tool. Simply drill the appropriately sized hole and thread in the insert like an ordinary fastener. Proprietary external Knife Threads slice into hard wood, providing holding power superior to that of typical broad threads which crush wood during installation. ...Read more
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.


Stainless Steel Threaded Insert, UNC Threads, HRC96 Hardness, #10-24 Threads, 0.50

E-Z LOK Knife Thread inserts for hard wood significantly reduce the possibility of stripping when using a threaded fasteners in materials such as oak, cherry, and maple. Ideal for applications ranging from furniture to cabinetry to storm shutters, E-Z LOK Knife Threads are easily installed using a standard screwdriver or optional drive tool. Simply drill the appropriately sized hole and thread in the insert like an ordinary fastener. Proprietary external Knife Threads slice into hard wood, providing holding power superior to that of typical broad threads which crush wood during installation. ...Read more



==================================================================
Stainless Steel Threaded Insert, UNC Threads, HRC96 Hardness, #10-24 Threads, 0.50

Stainless Steel Threaded Insert, UNC Threads, HRC96 Hardness, #10-24 Threads, 0.50" Length, 60200 psi Tensile Strength, Made In US, Pack Of 10



Stainless Steel Threaded Insert, UNC Threads, HRC96 Hardness, #10-24 Threads, 0.50

CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

cKc Pen Knife Testing

cKc Pen Knife Testing Video Clips. Duration : 19.72 Mins.


Great knife overall. Probably Kyley's most useful design. Excellent first cKc knife, as it's an inexpensive and extremely capable tool. Note that newer versions will be 2.5mm AEBL at 60RC. Mine is made from 2mm AEBL stainless steel at 58RC. The increase in hardness will mean that it will not dull as quickly. The slight dulling I experienced (And it was SLIGHT) is not due to abrasive wear, but very minor microscopic deformation. The hardness increase will help with that.

Wednesday 20 February 2013

Zwilling J.A. Henckels Twin Pro S 12-Inch Honing Steel

target="_blank">Zwilling J.A. Henckels Twin Pro S 12-Inch Honing Steel
Zwilling J.A. Henckels Twin Pro S 12-Inch Honing Steel
==================================================================

Zwilling J.A. Henckels Twin Pro S 12-Inch Honing Steel

32555-310 Features: -Sharpen your knives with ease.-Attractive design.-Provides safe storage. Dimensions: -Length: 12''. ...Read more
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.


Zwilling J.A. Henckels Twin Pro S 12-Inch Honing Steel

32555-310 Features: -Sharpen your knives with ease.-Attractive design.-Provides safe storage. Dimensions: -Length: 12''. ...Read more


Zwilling J.A. Henckels Twin Pro S 12-Inch Honing Steel

This honing steel serves a vital role by realigning, or "resetting," kitchen knives' edges, which bend this way and that when contacting a cutting surface. (Often called a sharpening steel, or "butcher" steel, a steel doesn't actually sharpen a knife--unless it's a "diamond" steel.) Consisting of a rod of hard steel-alloy with a tough synthetic handle and a steel finger guard, this steel works well and looks better than most hanging close at hand, where you can employ it frequently—ideally each time you use a knife. That prevents a blade from becoming dull and prolongs intervals between professional sharpenings. The rule is that a steel should be at least as long as the knife blade being drawn across it, and this steel's 12-inch rod hones all household knives. The steel carries a lifetime warranty against defects. --Fred Brack ...Read more


==================================================================
Zwilling J.A. Henckels Twin Pro S 12-Inch Honing Steel

Zwilling J.A. Henckels Twin Pro S 12-Inch Honing Steel


Model Of Item : 32555-310


Zwilling J.A. Henckels Twin Pro S 12-Inch Honing Steel

CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Onion Skinner Knife | CRKT Knives

Onion Skinner Knife | CRKT Knives Tube. Duration : 0.88 Mins.


Available at OsoGrandeKnives.com - America's Cutlery Specialists www.osograndeknives.com View all CRKT Knives www.osograndeknives.com CRKT K700KXP Onion Skinner, Double Injection Molded Handle, Black Leather Sheath. www.osograndeknives.com Hawaiian knifemaker Ken Onion has been working on the ultimate hunting knife, for over five years. Ken has concluded an extensive field testing program, making dozens of custom skinners and giving them to Alaskan guides, professional hunters, and taxidermists in exchange for their feedback. He kept modifying the design and sending out more knives, which have now been used to skin over 60 Alaskan bears, and have been proven on deer, elk, moose, antelope, hogs, sheep and cattle. While some were skeptical at first, it has become the favorite knife of many of the top guides. It also works well for skinning, gutting, deboning, the fine detail cuts preferred by taxidermists, and even kitchen and camp chores. We call it simply the Onion Skinner. It features a three-quarter tang Bohler K110 stainless steel blade, high hollow-ground and polished to a satin finish, with a hardness of HRC 58-60. The scales are Twin-Fused™ with a Zytel core and soft textured TPR outside for grip. A lanyard is included. The custom leather sheath is molded and fitted to grip the scales and lock the knife in position until needed. It can be worn left or right, inside or outside the belt. Here's an explanation of its unusual features and their functions: First, the ...

Sunday 17 February 2013

Master Grooming Tools Stainless Steel Swivel Select Pet Straight Shears, 8-1/2-Inch

target="_blank">Master Grooming Tools Stainless Steel Swivel Select Pet Straight Shears, 8-1/2-Inch
Master Grooming Tools Stainless Steel Swivel Select Pet Straight Shears, 8-1/2-Inch
==================================================================

Master Grooming Tools Stainless Steel Swivel Select Pet Straight Shears, 8-1/2-Inch

This swivel select series shears are designed for smooth, precision cutting. Made of Hitachi stainless steel with added molybdenum for strength and durability. Swivel thumb eliminates the need for you to twist your arm while cutting, reducing strain on hands and wrists. These straight shears are ideal for general-purpose scissoring. Each shear features a finger rest, a dialed tension adjuster with blue rhinestone accents and a rubber silencer. Each comes in a leatherette carrying case. Measures 8-1/2-inch length with a rockwell hardness rating of 60-61. ...Read more
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.


Master Grooming Tools Stainless Steel Swivel Select Pet Straight Shears, 8-1/2-Inch

This swivel select series shears are designed for smooth, precision cutting. Made of Hitachi stainless steel with added molybdenum for strength and durability. Swivel thumb eliminates the need for you to twist your arm while cutting, reducing strain on hands and wrists. These straight shears are ideal for general-purpose scissoring. Each shear features a finger rest, a dialed tension adjuster with blue rhinestone accents and a rubber silencer. Each comes in a leatherette carrying case. Measures 8-1/2-inch length with a rockwell hardness rating of 60-61. ...Read more



==================================================================
Master Grooming Tools Stainless Steel Swivel Select Pet Straight Shears, 8-1/2-Inch

Master Grooming Tools Stainless Steel Swivel Select Pet Straight Shears, 8-1/2-Inch


Model Of Item : TP348 85 10


Master Grooming Tools Stainless Steel Swivel Select Pet Straight Shears, 8-1/2-Inch

CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

More Fun With the War Sword

More Fun With the War Sword Video Clips. Duration : 4.52 Mins.


just some more testing and fun with this sweet war sword :) the real fun stuff is still coming :) just have some editing to do :) Gavko Custom War Sword 16" blade, 24" overall, 0.21" CPM3V @ 61 HRC Convex grind Don't forget to check out gavko.info for some pictures of my previous work...

Thursday 14 February 2013

Brass Stacker See Thru Scout Scope Mount for Mosin Nagant M38 & M44

Brass Stacker See Thru Scout Scope Mount for Mosin Nagant M38 & M44

Brass Stacker See Thru Scout Scope Mount for Mosin Nagant M38 & M44



[else] [endif]
Brass Stacker See Thru Scout Scope Mount for Mosin Nagant M38 & M44

Brass Stacker See Thru Scout Scope Mount for Mosin Nagant M38 & M44

Brass Stacker Model 3844-SSM See Thru Scout Scope Mount for Mosin Nagant M38 & M44's. SPECIFICATIONS: This Mount utilizes the barrel pin hole and the pivot pin hole in the rear sight block. The Mount will accommodate a front to back (horizontal, parallel to bore axis) pin center distance of 1.56" (39.6mm) to 1.79" (45.4mm) and allows for an up and down (vertical, perpendicular to bore axis) pin center distance of .18" (4.6mm) to .41" (10.3mm). The Mount is designed to fit over rear sight blocks that measure between .750" (19.05mm) and .787" (20.00mm) wide. The total weight including hardware is 5.4 oz. Please note that we have made every reasonable effort to ensure that our Mount will work with the vast majority of M38 & M44's. If for any reason our Mount does not work with your specific M38 or M44 it can be returned (undamaged) for a full refund. FITMENT NOTES: This mount will NOT work for a 9130! See Model 9130-SSM for a 9130. The pin hole in the rear sight block is often located inconsistently as a result of the original manufacturing process. The pin hole, relative to the pivot pin, is frequently not parallel and may be out of alignment or skewed. The Mount can only accommodate so much of this misalignment. You should measure the center distances from barrel pin to pivot pin on both sides and check those with the dimensions listed in the SPECIFICATIONS to ensure that the mount will fit properly. A 3mm drill is provided and can be used to clean out and straighten (to some degree) without enlarging the barrel pin hole once the pin is removed. The barrel pin hole and pivot pin hole in the rear sight block are generally .118" (3.0mm) in diameter and the supplied 3mm bolts have a nominal OD of .115" (2.92mm). This tight fit along with the use of an appropriate liquid thread locker for the screws and nuts, as well as proper tightening of the same should result in no movement of the Mount during normal firing recoil. SCOPE & RINGS ARE NOT PROVIDED! ...Read more


Brass Stacker See Thru Scout Scope Mount for Mosin Nagant M38 & M44

Brass Stacker Model 3844-SSM See Thru Scout Scope Mount for Mosin Nagant M38 & M44's. SPECIFICATIONS: This Mount utilizes the barrel pin hole and the pivot pin hole in the rear sight block. The Mount will accommodate a front to back (horizontal, parallel to bore axis) pin center distance of 1.56" (39.6mm) to 1.79" (45.4mm) and allows for an up and down (vertical, perpendicular to bore axis) pin center distance of .18" (4.6mm) to .41" (10.3mm). The Mount is designed to fit over rear sight blocks that measure between .750" (19.05mm) and .787" (20.00mm) wide. The total weight including hardware is 5.4 oz. Please note that we have made every reasonable effort to ensure that our Mount will work with the vast majority of M38 & M44's. If for any reason our Mount does not work with your specific M38 or M44 it can be returned (undamaged) for a full refund. FITMENT NOTES: This mount will NOT work for a 9130! See Model 9130-SSM for a 9130. The pin hole in the rear sight block is often located inconsistently as a result of the original manufacturing process. The pin hole, relative to the pivot pin, is frequently not parallel and may be out of alignment or skewed. The Mount can only accommodate so much of this misalignment. You should measure the center distances from barrel pin to pivot pin on both sides and check those with the dimensions listed in the SPECIFICATIONS to ensure that the mount will fit properly. A 3mm drill is provided and can be used to clean out and straighten (to some degree) without enlarging the barrel pin hole once the pin is removed. The barrel pin hole and pivot pin hole in the rear sight block are generally .118" (3.0mm) in diameter and the supplied 3mm bolts have a nominal OD of .115" (2.92mm). This tight fit along with the use of an appropriate liquid thread locker for the screws and nuts, as well as proper tightening of the same should result in no movement of the Mount during normal firing recoil. SCOPE & RINGS ARE NOT PROVIDED! ...Read more



Brass Stacker See Thru Scout Scope Mount for Mosin Nagant M38 & M44

Brass Stacker See Thru Scout Scope Mount for Mosin Nagant M38 & M44
==================================================================
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Automatic packing machine for dosed out packing of powders in bags.

Automatic packing machine for dosed out packing of powders in bags. Video Clips. Duration : 0.80 Mins.


www. RomanTsibulsky.com Roman Tsibulsky is professional consultant in choice of any pharmaceutical equipment. Big catalogue of new equipment from factories of China, India, Korea. A lot of second-hand equipment from Europe and Russia. I assist in choice, search, delivery and customs clearance of pharmaceutical equipment to Russia. I have wide experience and knowledge of technologies. In my catalogues it is a lot of video, photos, descriptions of various equipment. I complete lines and separate machines by product samples. All assortment of joint products (packaging, raw, expendable materials) Moscow phone +7-495-364-38-08 Minsk phone +375-29-308-00-00 Roman Tsibulsky Mail: info@romantsibulsky.com Skype: RomanTsibulsky Equipment catalogue minipress.ru

Monday 11 February 2013

T-bolts DIN787, thread M10 x 63mm long, hardness 8.8

target="_blank">T-bolts DIN787, thread M10 x 63mm long, hardness 8.8
T-bolts DIN787, thread M10 x 63mm long, hardness 8.8
==================================================================

T-bolts DIN787, thread M10 x 63mm long, hardness 8.8

Material: Tempered steel



Version: Forged, slot flats milled, tensile strength 8.8, burnished.



* These dimensions are not part of the DIN.
d [mm]M 10
For T-Slots DIN 650 [mm]10
l [mm]63
a [mm]9,6
b [mm]45
e [mm]15
k [mm]6
Weight [g]50
...Read more
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.


T-bolts DIN787, thread M10 x 63mm long, hardness 8.8

Material: Tempered steel



Version: Forged, slot flats milled, tensile strength 8.8, burnished.



* These dimensions are not part of the DIN.
d [mm]M 10
For T-Slots DIN 650 [mm]10
l [mm]63
a [mm]9,6
b [mm]45
e [mm]15
k [mm]6
Weight [g]50
...Read more



==================================================================
T-bolts DIN787, thread M10 x 63mm long, hardness 8.8

T-bolts DIN787, thread M10 x 63mm long, hardness 8.8



T-bolts DIN787, thread M10 x 63mm long, hardness 8.8

CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

UIT (Ultrasonic Impact Technology) with Enhanced Surface Finish. Aluminum Dogbone Specimen

UIT (Ultrasonic Impact Technology) with Enhanced Surface Finish. Aluminum Dogbone Specimen Tube. Duration : 2.37 Mins.


Ultrasonic Peening (Ultrasonic Impact Technology, UIT) (*click down for more*) surface treatment demo on aluminum dogbone specimen, with robotic control for superior precision. Note the change in texture of the treated surface. Unlike other peening methods, the surface finish can be controlled and therefore enhanced to be smoother. Benefits of Ultrasonic Impact Treatment (UIT) over other peening methods: Ultrasonic Peening is a dry process Ultrasonic Impact Treatment (UIT) achieves better results than shot peening UIT has no messy cleanup or environmental issues, as you have with shot peening Unlike shot peening, Ultrasonic Peening is controllable & repeatable, with minimal risk of over-treatment Metal improvement is achieved by establishing a zone of stress relief and a zone of tensile stress- a better stress gradient for extended life. There is additional metal improvement. A beneficial side effect of Ultrasonic Peening is increased hardness without loss of toughness. In addition to the improvement in stress corrosion properties, there is a big benefit in fatigue life and fatigue strength. This result is best achieved with the softer metals. The surface finish can be controlled for appropriate smooth or roughness. Applied Ultrasonics: www.appliedultrasonics.com Applied Ultrasonics is the world leader in metal improvement by Ultrasonic Peening, or, Ultrasonic Impact Treatment also known as Ultrasonic Impact Technology. UIT is a more versatile and effective process than ...

Friday 8 February 2013

Carbon Steel Threaded Insert, UNC Threads, HRC84 Hardness, 3/8"-16 Internal Threads, 5/8"-11 External Threads, 0.656" Length, 60200 psi Tensile Strength, Made In US, Pack Of 5

Carbon Steel Threaded Insert, UNC Threads, HRC84 Hardness, 3/8

Carbon Steel Threaded Insert, UNC Threads, HRC84 Hardness, 3/8"-16 Internal Threads, 5/8"-11 External Threads, 0.656" Length, 60200 psi Tensile Strength, Made In US, Pack Of 5



[else] [endif]
Carbon Steel Threaded Insert, UNC Threads, HRC84 Hardness, 3/8

Carbon Steel Threaded Insert, UNC Threads, HRC84 Hardness, 3/8

E-Z LOK threaded inserts for metal provide an easy to use solution for repairing or reinforcing threaded holes in metal. Ideal for use in metals like aluminum and cast iron, E-Z LOK threaded inserts are screw machined out of solid steel for greater strength and superior pull out resistance. Standard external threads permit the use of standard drills and taps for installation. Once the hole is prepared, E-Z LOKs are threaded into the hole like an ordinary fastener using a screwdriver, bolt and jam nut, or optional E-Z LOK drive tool. E-Z LOKs are self locking and will not back out or vibrate loose. A preapplied adhesive activates upon installation and bonds to virtually all metals. Fastener-ready in minutes, the adhesive seals against liquids and gases to pressures of 6,000 psi. when fully cured (72 hours). ...Read more


Carbon Steel Threaded Insert, UNC Threads, HRC84 Hardness, 3/8

E-Z LOK threaded inserts for metal provide an easy to use solution for repairing or reinforcing threaded holes in metal. Ideal for use in metals like aluminum and cast iron, E-Z LOK threaded inserts are screw machined out of solid steel for greater strength and superior pull out resistance. Standard external threads permit the use of standard drills and taps for installation. Once the hole is prepared, E-Z LOKs are threaded into the hole like an ordinary fastener using a screwdriver, bolt and jam nut, or optional E-Z LOK drive tool. E-Z LOKs are self locking and will not back out or vibrate loose. A preapplied adhesive activates upon installation and bonds to virtually all metals. Fastener-ready in minutes, the adhesive seals against liquids and gases to pressures of 6,000 psi. when fully cured (72 hours). ...Read more



Carbon Steel Threaded Insert, UNC Threads, HRC84 Hardness, 3/8

Carbon Steel Threaded Insert, UNC Threads, HRC84 Hardness, 3/8
==================================================================
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Hardness Testing

Hardness Testing Tube. Duration : 0.60 Mins.


Hardness testing of stainless steel

Tuesday 5 February 2013

Carbon Steel Threaded Insert, UNC Threads, HRC84 Hardness, 1/4"-20 Internal Threads, 7/16"-14 External Threads, 1" Length, 60200 psi Tensile Strength, Made In US, Pack Of 5

Carbon Steel Threaded Insert, UNC Threads, HRC84 Hardness, 1/4

Carbon Steel Threaded Insert, UNC Threads, HRC84 Hardness, 1/4"-20 Internal Threads, 7/16"-14 External Threads, 1" Length, 60200 psi Tensile Strength, Made In US, Pack Of 5



[else] [endif]
Carbon Steel Threaded Insert, UNC Threads, HRC84 Hardness, 1/4

Carbon Steel Threaded Insert, UNC Threads, HRC84 Hardness, 1/4

E-Z LOK threaded inserts for metal provide an easy to use solution for repairing or reinforcing threaded holes in metal. Ideal for use in metals like aluminum and cast iron, E-Z LOK threaded inserts are screw machined out of solid steel for greater strength and superior pull out resistance. Standard external threads permit the use of standard drills and taps for installation. Once the hole is prepared, E-Z LOKs are threaded into the hole like an ordinary fastener using a screwdriver, bolt and jam nut, or optional E-Z LOK drive tool. E-Z LOKs are self locking and will not back out or vibrate loose. A preapplied adhesive activates upon installation and bonds to virtually all metals. Fastener-ready in minutes, the adhesive seals against liquids and gases to pressures of 6,000 psi. when fully cured (72 hours). ...Read more


Carbon Steel Threaded Insert, UNC Threads, HRC84 Hardness, 1/4

E-Z LOK threaded inserts for metal provide an easy to use solution for repairing or reinforcing threaded holes in metal. Ideal for use in metals like aluminum and cast iron, E-Z LOK threaded inserts are screw machined out of solid steel for greater strength and superior pull out resistance. Standard external threads permit the use of standard drills and taps for installation. Once the hole is prepared, E-Z LOKs are threaded into the hole like an ordinary fastener using a screwdriver, bolt and jam nut, or optional E-Z LOK drive tool. E-Z LOKs are self locking and will not back out or vibrate loose. A preapplied adhesive activates upon installation and bonds to virtually all metals. Fastener-ready in minutes, the adhesive seals against liquids and gases to pressures of 6,000 psi. when fully cured (72 hours). ...Read more



Carbon Steel Threaded Insert, UNC Threads, HRC84 Hardness, 1/4

Carbon Steel Threaded Insert, UNC Threads, HRC84 Hardness, 1/4
==================================================================
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Monday 4 February 2013

Plastic crate mould testing

Plastic crate mould testing Tube. Duration : 0.95 Mins.


Nisan Plast can make all kinds of plastic crate molds. Product Name: Crate mould Plastic material: PP Mould size (mm): 900*700*450 Mould weight (Kgs): 2200 Core & Cavity Steel: P20 China steel Mould base: 50# Steel hardness: 30-32 HRC Cavity Number: One Ejection system: Automatic Type of runner: 4 drop, Hot runner Cycle Time: 50 to 55 Seconds Mould manufacturing time: 40-50 days Mould life: 0.5 million shots. Our Advantage: 1.High quality 2.Reasonable price 3.On time delivery 4.Strict quality control 5.Good After-sale service With advanced production facilities and strict quality management system, we covers every aspects of the process from mould design to shipping. For more details please visit our website at www.nisanplast.com

Friday 1 February 2013

Pentel Graph Gear 1000 Automatic Drafting Pencil, 0.5mm Lead Size, Brushed Metal Barrel, 1 Each (PG1015A)

Pentel Graph Gear 1000 Automatic Drafting Pencil, 0.5mm Lead Size, Brushed Metal Barrel, 1 Each (PG1015A)

Pentel Graph Gear 1000 Automatic Drafting Pencil, 0.5mm Lead Size, Brushed Metal Barrel, 1 Each (PG1015A)


Model Of Item : PG1015A


[else] [endif]
Pentel Graph Gear 1000 Automatic Drafting Pencil, 0.5mm Lead Size, Brushed Metal Barrel, 1 Each (PG1015A)

Pentel Graph Gear 1000 Automatic Drafting Pencil, 0.5mm Lead Size, Brushed Metal Barrel, 1 Each (PG1015A)

Finely chiseled metallic grip inlaid with soft latex-free pads. Dual-function pocket clip releases heavy spring mechanism to retract tip. Sophisticated brushed metal barrel. Writes crisp, .5mm fine lines of consistent density. Refillable with Pentel Super Hi-Polymer Lead and Z2-1 refill eraser. ...Read more


Pentel Graph Gear 1000 Automatic Drafting Pencil, 0.5mm Lead Size, Brushed Metal Barrel, 1 Each (PG1015A)

Finely chiseled metallic grip inlaid with soft latex-free pads. Dual-function pocket clip releases heavy spring mechanism to retract tip. Sophisticated brushed metal barrel. Writes crisp, .5mm fine lines of consistent density. Refillable with Pentel Super Hi-Polymer Lead and Z2-1 refill eraser. ...Read more



Pentel Graph Gear 1000 Automatic Drafting Pencil, 0.5mm Lead Size, Brushed Metal Barrel, 1 Each (PG1015A)

Pentel Graph Gear 1000 Automatic Drafting Pencil, 0.5mm Lead Size, Brushed Metal Barrel, 1 Each (PG1015A)
==================================================================
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.
 

Sample text

Sample Text

Sample Text